What to do if your Volvo V40 has a low oil pressure warning light?
The Volvo V40 low oil pressure warning light requires that you safely pull off the road as quickly as possible and switch off the engine. Check the engine oil level and top up with oil if required. If the oil level is normal and doesn’t require topping up, do not continue driving.
What to do if check engine light comes on in Volvo?
Your Volvo expert will be able pinpoint the problem for you by connecting your Volvo to a diagnostic scan tool. This tool will provide trouble codes stored in your electronic control system, and reveal why the check engine light came on.
Why does the ABS light come on on a Volvo V40?
The system prevents wheel lock during emergency braking. The Volvo V40 ABS warning light comes on when driving to indicate a fault with the system. This is often a fault with a connecting cable or sensor. Regular brakes will continue to work as usual. Safely stop the car and switch off the engine.
How to check AdBlue level on Volvo V40?
You can check the AdBlue level by pressing ‘OK’ on the left-side stalk switch and selecting AdBlue in the menu options. To help with fuel economy and environmental concerns, the Volvo V40 is equipped with automatic engine start / stop technology. This green ‘A’ symbol illuminates when the system is operational and has invoked engine shut down.
What to do if your Volvo check engine light is not working?
With your Volvo safely parked, you should read the fault codes, fix the underlying problem then reset the check engine light. For this step, you will need an OBD2 scanner. The procedure is effortless and takes less than 10 min. Locate the OBD-II port under the dashboard. Turn ignition to position II.
What does the low oil pressure warning light mean?
They indicate an important function has been activated or that a serious fault has occurred. The Volvo V40 low oil pressure warning light requires that you safely pull off the road as quickly as possible and switch off the engine. Check the engine oil level and top up with oil if required.
Where are the tyre pressure values on a Volvo V40?
1. Stop the engine and locate the correct tyre pressure values located on the inside of the driver’s door. Inflate the tyres to the correct values. 2. Start the engine and allow the car to stand still. 4. Select the menu system MY CAR and navigate to Tyre monitor. 5. Select Start Calibration and press OK. 6. Drive the car.