Where can I find the blend door actuator?
The mix/blend door actuator is reached by removing the glove box trim strip on the right, then remove the screws around the glove box, disconnect the wire connector and remove the box. Inside you will see a duct connection that you need to remove and the blend actuator is behind it.
How to test blend door actuator, climate control, heater?
In some cases you can manually test the blend door actuator in others you can use computer for the diagnostics. There are usually a few blend door actuators that are part of the hvac system. This way you will know which blend door is bad and needs to be replaced. ► Like Us on FACEBOOK: https://www.facebook.com/worldmechani…
Is there a problem with my Blender actuator?
Knocking: This is an unusual symptom, but if you’re experiencing this, it’s almost definitely a problem with your blender actuator. When you start the car, or just the AC system, and notice a knocking sound like someone tapping on your door, that is indicative of a problem with the blend door actuator.
Can a heater be removed from a blend door?
If the door is stuck the heater plenum with need to be removed and the problem resolved before installing the new unit. To test the blend door operation and too double check that you are changing the correct actuator motor turn the blower motor on and work the door in each way. You will be able to feel the air change temperature or vent level.
What are the symptoms of a bad blend door actuator?
The symptoms of a bad blend door actuator include a lack of heat or air conditioning, or failure of air to blow through some or all of the vents. The actuator motors may also make a noise if they’ve failed, but this isn’t always the case.
How much does it cost to repair a blend door actuator?
Blend door actuator repair cost. The cost of repairing the blend door actuator, as with most car repairs, will depend on the mechanic you hire, your geographical region and the car you drive. Most of the repair quotes we researched online ranged anywhere from $75 to $275 for both parts and labor. As with most car repairs,…
Where do I find the actuator blend door?
A blend door actuator is linked to an air control door pivot found on the last drive of the unit; a plastic gear set is frequently rotated from one side to another by the electric motor. An actuator can become faulty if the plastic gear set turns out to be fragile and it breaks.
What does a blend door actuator do?
Blend door actuators, also called HVAC actuators, control the position of the vents that control the flow of air into your vehicle’s passenger area. The actuators are small electric motors that move the vent doors, mixing hot air with cold air to achieve the temperature that you desire.