Which way do the blades go on a John Deere mower?

Which way do the blades go on a John Deere mower?

Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.

How do you sharpen riding lawn mower blades without removing them?

Take the blade off and use an angle grinder to take it down. Hold the grinder at the proper angle on the blade (in a vise) and keep the grinder moving back and forth along the cutting surface, never letting it stay in one place long enough to turn the metal blue.

Why does my mower cut better when I pull it backwards?

A push model that mows grass better when pulled in reverse than pushed forward may need to be sharpened. The forward motion of the wheels is what turns the interlocking blades and, when operated in reverse, the blades turn in reverse. Have your mower professionally sharpened to ensure the issue is resolved.

Why does my mower leave a row of grass between two blades?

Among the most common reasons a streak of grass remains uncut between mowing rows is that the person operating the mower doesn’t overlap the rows enough. A streak of uncut grass also could be the result of the mower blades being too short for the mower deck.

Do mower blades turn clockwise?

The blades on many brands of walk-behind mowers rotate to the right, the clockwise direction, when you are mowing. To remove the blade, you must turn the blade’s retaining bolt to the left, or counterclockwise.

How often should you sharpen lawn mower blades?

every 20 to 25 hours
On average, a mower blade should be sharpened after every 20 to 25 hours of use time. This depends on how often and how long you mow.

Do you sharpen both sides of a lawn mower blade?

Your lawn mower blade is dull. Sharpen the blade twice each season to help maintain a green, healthy lawn. A sharp blade not only cuts blades clean so grass plants recover quickly, it helps reduce your lawn mowing time.

How to change blades on a John Deere riding mower?

John Deere L100 series. Taking off mower deck and changing blades. Deck belt and two blades. I think most small riding mowers will be similar. Be careful and at your on risk. I am no professional just a do-it-yourselfer. This is my first video, be kind. Loading…

How do you lower the deck on a John Deere lawn mower?

Turn the mower cutting height knob in the middle of the fender deck, below the operator seat, to the desired cutting height. Press down on the left side foot pedal and push down on the mower lift lock lever. Release the pedal to lower the mower deck.

How do you adjust the height of a John Deere lawn mower?

In both of these height adjustments you can cut as low as a one-inch, and up to a four-inch cut. This procedure takes two minutes to complete. Park the lawn mower on a level surface and place the transmission in the neutral position. Locate the mower deck lift handle on the left side of the fender deck.